Cleaning And Maintenance - Ninja Prestige Dualbrew System Kurzanleitung

INTELLIGENT WARMING PLATE
The Intelligent Warming Plate will automatically turn on while brewing a Classic or Rich brew
on any Carafe size and remain on for 40 minutes. To adjust how long the Intelligent
Warming Plate remains on (up to 40 minutes) and/or set the temperature to Low, Medium, or
High, refer to the Owner's Guide., refer to the Owner's Guide.
When the Intelligent Warming Plate is on, it can be turned off manually by pressing WARM.
It can be turned on manually by pressing WARM while Grounds mode, Classic or Rich, and
any Carafe size are selected.
IMPORTANT: The light on the base of the brewer will illuminate only when the warming plate is
hot and will remain illuminated until the plate has cooled down.
CUSTOMISE YOUR BREW
PICKING THE RIGHT BEANS: The type of grounds you select will impact the flavour of your drink.
See below for a description of each roast.
Light Roast: High acidity, floral, and delicate.
Dark Roast: Low acidity, sweet, and nutty with notes of chocolate.
ADJUSTING STRENGTH:
Too Watery/Weak: If classic was selected, try the rich setting. If that is still too weak, add one more
scoop. Adding a scoop will make your drink stronger, will deliver a slightly lower volume, and can make
your coffee taste less bitter.
Too Strong: If rich was selected, try classic. If that is still too strong, try using one less scoop.
Removing a scoop will make your drink weaker, deliver a slightly higher volume, and can make your
coffee taste slightly more bitter.
For best results, do not go more than 2 scoops above or below the recommended amount.
NOTE: Sediment in coffee can contribute to a more full-bodied and satisfying mouthfeel. The presence of
coffee grounds can enhance the perceived richness and boldness of the brew. To reduce sediment, use a
slightly coarser grind or use a paper filter.
HOW TO GET THE HOTTEST DRINK
CHOOSING THE RIGHT CUP
Ensure the cup you are using is appropriate for the size of your drink. For a hotter drink,
use a cup that is a similar size to your drink. The thickness of the material your cup is made
of will also affect the temperature of your drink. For a hotter drink, use a cup made of
thinner material.
PREHEATING BEFORE YOU BREW
Running hot water through a grounds or capsules brew will help preheat the machine.
To further increase the temperature of your drink, brew the hot water into the cup you
would like to brew your drink in. The temperature of your cup will impact the temperature
of your drink. Discard the water, then dry the cup. Then, proceed to brewing.
DRIP STOP
The drip stop is used to close off the brew basket to prevent any coffee from dispensing. You will need to
manually open and close the drip stop by moving the handle to your desired position. The drip stop can
be closed and reopened at any point before, during, or after a brew.
CAN'T WAIT FOR
OPEN
THAT FIRST CUP?
Close the drip stop to
pause the brew cycle,
and pour yourself a
cup. Then, reopen the
drip stop to continue
the brew.
6 For how-to videos and more, visit ninjakitchen.co.uk
CLOSED
STOP THE DRIPS
AFTER A BREW
At the end of a brew,
close the drip stop
to prevent coffee
dripping from the
brew basket.
FROTHING
COLD HOT
THE INTEGRATED FROTHER
DOES NOT HEAT MILK.
NOTE: Clean the frother whisk after
each use. Hand-wash thoroughly or
place on top rack of dishwasher.

CLEANING AND MAINTENANCE

CLEANING AFTER A BREW
Dishwasher Safe Parts:
Brew basket, glass carafe and brew-through lid,
water reservoir and lid, frother whisk, Ninja smart
scoop, capsule bin, adjustable cup tray, cup tray
base, and permanent filter are dishwasher safe.
CLEANING THE FROTHER
Clean the frother whisk after each use. Hand-wash
thoroughly or place on top rack of dishwasher.
CLEANING THE WATER RESERVOIR
NOTE: For best results, we recommend rinsing
the reservoir after brewing and refilling with
fresh water prior to the next brew.
Empty the reservoir and hand-wash or place in
dishwasher. For a better clean, we recommend
placing it in the bottom rack of the dishwasher
standing upright with the opening facing
downward. We recommend doing this weekly.
See below for the recommended recipes for different types
of espresso based drinks. Feel free to adjust these recipes
to your preferences.
MICROWAVE
DRINK FROTH
VOLUME TIME
TYPE TYPE
(MINUTES)
Cortado Thin 60 ml. 0:30
Machiatto
Thick 60 ml 0:30
Flat White Thin 160 ml 1:10
Cappuccino Thick 160 ml 1:10
Latte Thin 240 ml 1:50
For Cold Foam, fill up to 1/3 of your cup with milk and froth
until satisfied.
1. After selecting your recipe, add the listed amount of
milk to your cup.
2. Heat in the microwave for the recommended amount of
time. If doing a cold drink, skip this step.
3. Swing the arm of the frother toward the front of the
brew. Install the frother whisk by twisting it to the right.
4. Hold the cup under the frother and submerge just above
the bottom of your cup.. Press and hold the button on
top of the frother and froth for the recommended time
for your drink (Dairy and plant based milk will have the
same froth times).
5. Remove the frother whisk by twisting it to the left. Keep
your cup below the whisk while you carry it to your sink
or dishwasher for easy cleaning.
WARNING: To avoid contact with steam
and hot surfaces, DO NOT reach across
top of brewer to froth.
CLEANING THE CARAFE
We recommend cleaning your carafe after each use with
warm, soapy water.
To clean the carafe more thoroughly, we recommend
using a soft foam brush.
DO NOT use a wire brush.
CLEANING THE CAPSULE BIN
Remove the cup tray, cup tray base, and capsule
bin from under the capsule outlet. Discard the used
capsules from the capsule bin. Hand-wash the cup
tray, cup tray base, and capsule bin or place on top
rack of dishwasher.
CLEANING THE BREW BASKET
If brewing grounds, allow the brewer to cool, then
remove the brew basket by pinching the handle and
lifting straight up. If using a paper filter, discard the
filter by dumping the brew basket upside down into
a waste-bin.
Questions? +44 (0)800 862 0453
FROTH TIME
(MINUTES)
0:03
0:10
0:10
0:25
0:15
7