Herunterladen Diese Seite drucken

Overmax Semi-automatic Screen 100 Bedienungsanleitung Seite 4

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 5
Introduction
Dear customer!
Thank you for placing trust in us and choosing Overmax.
Thanks to the use of high-quality materials and modern solutions, we provide you with a product
EN
perfect for everyday use. We are convinced that the product will meet your requirements as it
has been manufactured with utmost care Before you use the product, please read this operating
manual carefully.
Should you have any remarks or questions concerning the product, please do not hesitate to
contact us: pomoctechniczna@overmax.pl
Important
Please read this manual before you start using the product to see its functions and use them
in accordance
The screen must not be folded. Do not touch the screen surface with your fingers or hard
1.
items. Make sure the screen does not contact liquids
Use the device away from sources of heat, high temperatures,
2.
ignition and naked flame.
Description (fig. 1)
Case
Hook
bracket
2.
3.
Screen
How
to assemble
Be careful when taking the screen out of the box. Make sure the screen and accessories
are in a good condition
To mount
screen on the wall is presented in the fig. 2 Fix the screws tightly and carefully to make
sure they can bear a load of 25 kg
To mount the screen on the ceiling, hook the brackets. A suitable installation of the screen
on the ceiling is presented in the fig 3
Install the case horizontally.
Take the screen out manually, be careful and gentle Pull the screen upwards or downwards,
never towards yourself. Stop taking it out when the black frame gets visible
Install moving parts 25 cm above the floor.
The unrolled screen must hang freely and must not touch the floor,
After use, the screen should be slightly pulled downwards, then rolled up and put into
the case.
How
to clean
Clean the
Do not use cleaning agents.
Do not
Wipe the case with a wet cloth
When you finish using, hide the screen to avoid dirt
The pictures arefor reference only. The real design of the products may differ from the pictures presented
with
intended
use
and use
the screen on the wall, fasten
and maintain
screen
with
a soft
cloth.
use water
to clean
the
Lower
4.
Handle
5.
6.
Black
brackets on screws. A suitable
screen
direct sunlight, sources of
slat
of the screen
frame
installation
of the
loading

Verwandte Produkte für Overmax Semi-automatic Screen 100