Brateck WWS05-01 Bedienungsanleitung
Inhaltszusammenfassung für Brateck WWS05-01
- Seite 1 Manual SIT-STAND WORKSTATION WALL MOUNT 32" VESA Compatible WWS05-01 MONITOR KEyaoARD TRAY RATED RATED 75x75 IOOx100 1-9kg/2.2-19Ælbs 1kg/2.21bs 10kg/221bs...
- Seite 2 Read the entire instruction manual before you Start installation and assembly. If you have any questions regarding any Ofthe instructions or warnings, please contact your local distributor for assistance, CAUTION: use with products heavier than the rated weights indicated may result in instability causing possible injury. •...
- Seite 3 over tighten the screws. 6 Omm ø 10mm SSmm ø 4.5mm (ø 3/8") cø 3/16") (2.2")
- Seite 4 Too Iong Too Short...
- Seite 5 To properly balance the arm with monitors mounted, adjust the spring tension using supplied Allen Key as follows: First, position and firmly hold the arm horizontally as shown. Ask for assistance should you require If the arm drops, turn the adjustment screw counter-clockwise until it stays...
- Seite 6 ST6.3x55 Ø10x45 60mm ø 10mm (ø 3/8") (2.4")