Technical Data - Conrad Renkforce Rf-Wc-190 Bedienungsanleitung

Operating Instructions
RF-WC-190 2K HD Resolution Web Camera
Item no: 3415368
1 Operating Instructions for download
Use the link www.conrad.com/downloads
complete operating instructions (or new/current versions if available). Follow the instructions
on the web page.
2 Intended use
The product is a webcam that connects to a USB port on a PC. Use the product in video
calls and to record images and videos.
If you use the product for purposes other than those described, the product may be dam-
aged.
Improper use can result in short circuits, fires, or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.
3 Delivery contents
■
Product
4 Description of symbols
The following symbols are on the product/appliance or are used in the text:
The symbol warns of hazards that can lead to personal injury.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous
playing material for children.
■
If you have questions which remain unanswered by this information product, contact our
technical support service or other technical personnel.
■
Maintenance, modifications and repairs must only be completed by a technician or an
authorised repair centre.
5.2 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam
and solvents.
■
Protect the product from high humidity and moisture.
■
Protect the product from direct sunlight.
■
Do not switch the product on after it has been taken from a cold to a warm environment.
The condensation that forms might destroy the product. Allow the product to reach room
temperature before you use it.
5.3 Connected devices
■
Also observe the safety and operating instructions of any other devices which are con-
nected to the product.
5.4 Handling
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
3
(alternatively scan the QR code) to download the
■
Operating instructions
6 Product overview
1 Light control button
3 Light
5 Microphone
7 Tripod socket
7 Getting started
To get started, mount the product on top of a PC display or on a tripod and connect the
product to a PC.
Preconditions:
a
The PC has booted.
1. Mount the product on top of a PC display or on a tripod.
2. Connect the USB-A plug to a USB port (min. USB2.0) on the PC.
à
The required drivers install automatically.
à The product is ready for use.
8 Operation
Note:
When another webcam is connected to the same PC, it is necessary to switch webcams.
8.1 Making video calls
After connecting the product to the PC, use the camera and microphone in video calls.
1. Start a video call application.
à The application recognizes the product as a camera.
2. Speak into the microphone for sound transmission.
8.2 Recording video and images
Use the product to record video and images and save them to the PC.
1. Open a video recording application on the PC.
à The application recognizes the product as a camera.
2. Record video and images and save them to the PC.
8.3 Adjusting the light
Turn on and off the light. Adjust the light settings for better image quality.
1. Touch the light control button multiple times to select a light colour or to turn the light off.
2. When the light is on, keep touching the light button to adjust the light intensity.
9 Cleaning and care
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions.
They damage the housing and can cause the product to malfunction.
– Do not immerse the product in water.
1. Disconnect the product from the power supply.
2. Clean the product with a dry, fibre-free cloth.

10 Technical data

Power supply ................................. 5 V/DC, min. 500 mA via USB
USB interface ................................ min. USB 2.0
System requirements ..................... Windows® 7 and above
Cable length .................................. 150 cm
Operating temperature .................. -20 to +65 °C
Operating humidity ........................ 20 – 90 % RH
1
2
3
4
5
6
7
2 Privacy shield cover
4 Camera
6 Clamp
MacOS Mojave 10.14 and above
Ubuntu 14.04