Overload Protection; Cleaning; Technical Data - Gewa Gl-Rj Gebrauchsanleitung

Overload protection

If GL-RJ is overloaded the overload protection will be activated. Press the
button for the overload protection to reset, see figure.

Cleaning

When being cleaned the relay unit must not be connected to the mains. To clean
the relay unit, wet a cloth in a weak solution of washing up liquid and water,
wring out thoroughly and wipe.

Technical data

Voltage:
Max load:
Power consumption
(stand-by):
Programming channels: GewaLink channels 00-61, 63-127 and 4096-code
Surroundings:
8
230V AC, 50 Hz
8 A
Ca 10 mA stand-by
Indoors