Technical Data - Schou Probuilder 106830 Gebrauchsanweisung

Tool Cart W/5 Drawers
INTRODUCTION
To get the most out of your new product, please read this manual before use. Please also save
the manual in case you need to refer to it at a later date.

TECHNICAL DATA

Top deck capacity:
Drawer size:
Max capacity per drawer:
Max cart capacity:
Cart dimensions:
NOTE:
Do not open more than one loaded drawer at
a time.
The maximum loading capacity is 110 kg.
Use a cross screwdriver model PH2 for the screw
(D).
Use a 14mm open-end wrench or a size 14
socket for the bolt (H).
For assembly, refer to the illustrations in the
beginning of this manual.
1- ASSEMBLY OF CASTERS
Install the 4 x 4-inch wheels on the bottom.
Place spacers, spring washers and screws into
each hole. Tighten the screws and fix.
• Note: The wheels are divided into 2 x
universal wheels and 2 x fixed wheels.
• The 2 x universal wheels should be on the
side of the handle.
SERVICE CENTRE
Note: Please provide the product model number in connection with all inquiries.
The model number is shown on the front of this manual and on the product rating plate.
www.schou.com
Manufactured in China
Manufacturer:
Schou Company A/S
Nordager 31
DK-6000 Kolding
www.schou.com
2- HANDLE INSTALLATION
3- LOCKING SYSTEM
4- INSTALLATION OF HOOKS
5- CASTERS WITH BRAKES
MAINTENANCE
Lubricate the top and bottom channels of the
drawer slides at least twice a year.
All rights reserved. The content of this manual may not be
reproduced, either in full or in part, in any way by electronic or
mechanical means, e.g. photocopying or publication, translated or
saved in an information storage and retrieval system without written
permission from Schou Company A/S.
9
35 kg
530 x 291 x 105 mm
15 kg
110 kg
616 x 330 x 850 mm
GB