Operation; Drying Cycle - Amplicomms DB 100plus Bedienungsanleitung

Operation

Drying Cycle

1. Plug AC adapter into the unit and wall outlet. Verify power indicator (9)
is ON.
2. Set humidity switch (4) for the following drying times:
- „Low Humidity" (left position) = 2 hours
- „Normal Humidity" (central position) = 4 hours
- „High Humidity" (right position) = 8 hours
3. Open hearing aid battery cover to expose the battery for drying also. If
you want to remove the batteries during the drying / refreshing cycle,
put them for safe storage onto the magnetized area (10). Please do not
forget to replace the batteries after completion of the drying / refreshing
cycle.
4. Place hearing aids in the chamber (1) and close the cover.
5. Press ON / OFF button (5) to start the selected drying time. The indicator
(6) is ON.
Helpline UK 0844 800 6503
(See page 14 for costs and hours of operation)
O A
PERATION NHANG
9