Java wellness P069/711090 Bedienungsanleitung

ROTARY WET DRY SHAVER
Item No:
P069/711090
Instructions for Use
Please read and retain these instructions for future reference
Power Details: Input Voltage: DC 5V
Accessories: Face Cleansing Brush, Hair Clipper Kit and Nose Trimmer,USB Charging Cable,
Charging Base, Instruction Manual
Please read this instruction manual thoroughly before starting and ensure you are familiar with the
operation of your new Rotary Wet Dry Shaver.
Charge:
Make sure the product is power-off before the charge. The charge lasts about 2 hours.
It's better for the product not to be connected to the power supply for more than 24 hours.
(Remark: Digital power display when charging 99 means full.)
1. Insert the product charger into the shaver.
2. Plug in the charger or place on the charging base
3. The charge indicator lights up.
4. After the full charge, unplug the charger and also pull off the product's plug from the shaver.
Shaving:
1. Press the button to start the shaver.
2. Make the shaver head part move quickly on the skin in straight lines and circles.
3. Cover the shaver's protective cover after using, to avoid being damaged.
4. The shaver can run for ten days after a full charge.
Cleaning& Maintenance:
To ensure a better shaving effect, the shaver must be cleaned regularly.The easiest and most
sanitary way to clean the product is to wash the shaver head part and the whisker storeroom with water
each time after using it.
Do be careful while using hot water.Do remember to check the water is not too hot to avoid
harming hands.Every day:the shaver head part and the hair storeroom.
1. Cut off the power supply of the shaver, then unplug the charger and also pull out the product,
plug from the shaver.
2. Open the shaver head part.
3. Clean the shaver head part and the hair storeroom with hot running water.Make sure both of
v001: 09/05/25
ENGLISH INSTRUCTIONS