Note
To use the pump function, the pump must be activated beforehand. Press and
hold the TIMER button for 3 seconds. Once the integrated water tank is full,
the pump will start automatically.
5. CLEAN THE DUST FILTER
To ensure efficient operation of the dehumidifier, you should clean the dust
filter after each week of operation. To do this, please follow the steps below:
1.
Switch off the appliance before cleaning, then wait a few minutes and
unplug the appliance to disconnect it from the mains.
2.
Remove the inserted air filter.
3.
Use a Vacuum Cleaner to remove the dust accumulated on the filter.
4.
If the grille and the filter are very dirty, soak the filter in hot water and
rinse it several times - the water temperature should not exceed 40°C,
however. Clean with a Vacuum Cleaner.
5.
Allow the dust filter to dry thoroughly after washing and put it back into
the dehumidifier.
NOTE
However, we recommend cleaning the filter as described after each week of
operation to ensure that the appliance works as efficiently as possible.
274