Herunterladen Diese Seite drucken
loading

Inhaltszusammenfassung für LAPPSET FINNO

  • Seite 22 A10875-216 Doc.Code: 304658 DATE: 7.8.2025 Rev.: 1 ITEM CODE QTY. P16853-216 HAND GRIP P17293-216 FLANGE P17302-216 ADAPTER P10225-216 PIPE 33,7x2,6 P10224-216 PIPE 33,7x2,6x1200 901902 CLAMP 30.7x60.9x100 980101 SCREW Ø4.5x70 901182 PUTKIMUTTERI Ø11/M8x40 900342 ALLEN SCREW M8x16 909850 ALLEN SCREW M8x25 980150 901900 FRICTION RUBBER...
  • Seite 23 A10875-216 Doc.Code: 304658 DATE: 7.8.2025 Rev.: 1 STEP1 SCALE 1 : 7 Pre drill holes and countersunk Ø5 Note! No tangling or sharp edges allowed STEP2 SCALE 1 : 7 Pre drill Ø6 60mm deep STEP3 SCALE 1 : 7...
  • Seite 24 A10875-216 Doc.Code: 304658 DATE: 7.8.2025 Rev.: 1 If hpl is 12mm use 903236 Ø30/10.5 STEP4 SCALE 1 : 10 +870 SLIDE OTHER SLIDES STEP6 SCALE 1 : 7 STEP7 STEP5 SCALE 1 : 7 SCALE 1 : 7...
  • Seite 25 31.1.2025...
  • Seite 73 16.2.2021 - Kiinnitä tuotekyltti ruuveilla tolppaan noin 2 metrin korkeuteen kuvan 1 mukaisesti. - Puhdista maalattu metalli- tai vaneripinta pölystä ja kosteudesta. Liimaa tarra kuvan 2 mukaisesti. - Rengör den pulverlackerade metallytan eller laminatytan så att den blir fri från smuts och fukt. Fäst etiketten enligt fig. 2. - Clean the painted metal or plywood surface from dirt and moisture.
  • Seite 84 A10874 06.03.2023 Page 1 of 7 BOM ID BOM ID Item Code Item Code Item Code Item Code 901868 909210 908021 909266 901879 900735 P16834 980128 P16836 909256 905051 P16837 980160...
  • Seite 85 A10874 06.03.2023 Page 2 of 7 980128 901879 Ø7x40...
  • Seite 86 A10874 06.03.2023 Page 3 of 7...
  • Seite 87 A10874 06.03.2023 Page 4 of 7 900735 909256 909256 980160 P16834 M8x60 Ø16/8.4x1.6 Ø16/8.4x1.6...
  • Seite 88 A10874 06.03.2023 Page 5 of 7...
  • Seite 89 A10874 06.03.2023 Page 6 of 7 909210 905051 908021 M8x40 Ø24/8.4 901868...
  • Seite 90 A10874 06.03.2023 Page 7 of 7 909210 M8x40 905051 Ø24/8.4 901868 909266 M8x50 P16837 P16836 905051 Ø24/8.4 909210 M8x40 909266 M8x50...

Diese Anleitung auch für:

137300m