Frequently Asked Questions (Faqs) - Marmitek Split 814 Pro Kurzanleitung

possible to downscale an 8K UHD video format to fit on a 4K or 1080p resolution screen.
This way the lower resolution screen can show the image without the high resolution
screen losing its high quality image.
To enable this feature, press the 'downscale' button [2], on the front panel of the Split 814
Pro™. Outputs 2, 3 and 4 will be downscaled. Refer to above mentioned dip switch table
to select the desired output resolution.
3

Frequently asked questions (FAQs)

No (or poor) image and sound
If you experience poor or no image after connecting the Split 814 Pro™, try detecting the
problem by connecting the devices to your TV or projector one at a time. This enables you
to determine whether the problem is in the HDMI source, the HDMI cables, the Split
814 Pro™ or the TVs.
•
Make sure the power adapter is connected and plugged in.
•
Ensure that the EDID switch is in the correct position as specified in section 5.1.1.
•
For the best picture and sound quality, only use Ultra High-Speed HDMI
cables.
•
Do not use HDMI cables longer than those specified in the technical data.
•
Check the HDMI cables and/or connectors for damage.
•
Both the HDMI source and your TV or projector should fully support HDMI.
Do you have any questions that are not answered here? Please check
Declaration of Conformity
Hereby, Marmitek BV, declares that the Split 61x Pro is in compliance with the essential requirements of the
2014/30/EU Directives.
Full Declaration of Conformity is available
www.marmitek.com/en/declarations-of-conformity/
at
®
certified
www.marmitek.com