Charging Operation - Axpol V0352 Benutzerhandbuch

Call answering：When the mobile phone calls, click the left and right earphones multi-function button to answer the call
Call hang up：During phone call, click the left and right earphones multi-function button to hang up the phone
Call rejection： When the mobile phone calls, long press the left and right headphones multi-function button for 2 seconds
to reject the call
Redial：While on standby or playing music, you can dial the last call you made in your call history by tapping the left
headset multifunction button three times
Voice assistant function: please tap the right headset multifunction button four times quickly
Low battery prompt：When the battery of the Bluetooth headset is low, the low battery tone will be played every 30
seconds until the headset is powered off
Pairing method:
1. Take out from the charging box or press and hold the left and right earphones multi-function button for 3 seconds to
turn on until the red and white lights flash alternately, enter the ear search pairing state and automatic matching, and
match the host earphone. The red and white lights are alternately flashing, the secondary earphone white light is flashing
slowly.
2. Start the Bluetooth function of the mobile phone or other devices. If it is an Android mobile phone or device, please
click the "Search for Bluetooth device" option. If it is the IOS system mobile phone or device, it will automatically search for
the device; when searching for the model of the Bluetooth headset After that, click to enter the pairing; when the pairing is
successful, the main (right) earphone will make a prompt to connect successfully, and the left and right earphones will turn
blue and flash slowly, and enter the connection standby state. After the pairing is successful, the main ear is the right channel.
The secondary ear is the left channel.
3. The two earphones can also be paired with the mobile phone separately. The operation method can be operated
according to the above step 2 operation method.

Charging operation:

1. Plug the USB-C charging cable into the USB-C port of the charging compartment and plug in the charger to charge the
charging compartment. Digital indicator shows charging progress. When the battery of charging compartment is full, the digital
indicator shows it – 100 %.
2. Charging the headset: Put the headset into the charging compartment to automatically charge. When charging, the
headset indicator is red. When the headset batteries is fully charged, it will be off. When the earphone is fully charged, all
lights of the charging compartment turns off.
LCD display
Once put the earphone into the charging case, the LCD will show the percentage of the charging case, then will show the
L R annoncement when charging for the two earphones, once one earphone fully charged, the LCD display info L or R will turn
off. When two earphones both fully charged, the LCD display will turn off.
Precautions:
1. Please charge in a safe environment. When charging the charging compartment, please charge the charging
compartment separately from the USB charging cable as soon as the charging indicator indicates full power, so as to avoid
damage to the charging compartment after a long time of charging.
2. When playing music, please adjust the music to the appropriate volume to avoid hearing damage at high volume for a
long time.
3. Try to avoid using the headset in a place with interference sources, otherwise it may affect the headphone signal.
4. Try to avoid using this headset in a corrosive environment to avoid affecting the function of the headset.
(Please note that the above manual is only for the factory default settings of the product. The right earphone is the host and the left
is the secondary earphone. However, during the consumer uses the earphone and the left earphone connect the Bluetooth device
firstly, then the left ear is the host and the function changes dynamically according to the above.)
Tips: When you use this Bluetooth headset to listen to music or talk, please pay attention to adjust the volume properly, so as
not to affect the hearing of excessive volume!
Producer: AXPOL Trading sp. z o.o.
ul. Krzemowa 3, Złotniki, 62-002 Suchy Las, Poland
This product complies with the current provisions of the Electromagnetic Compatibility Directive (EMC) 2014/30/EU and the Radio Equipment
Directive 2014/53/EU and the Restriction of the Use of Certain Hazardous Substances Directive (ROHS) 2011/65/EU and (EU) 2015/863 and proper
harmonized standards. To receive full text of the EU declaration of conformity, visit www.axpol.com.pl (search on reference).