Maintenance And Storage - Red Bull Oracle Rb-Sk460 Bedienungsanleitung

TF card slot (near the charging port): the device supports up to 64G flash cards and is compatible with Hi-Fi
WAV/MP3 files. Without a TF card inserted, the device powers in wireless mode by default. With a TF card inserted,
the device powers in TF mode by default.
7. Built-in Mic for call entrance.
8. Short press to change the RGB light mode. Single press to switch between six lighting modes (gradual color, flowing
colors, green, red, blue, purple-pink, and off).
INSTRUCTIONS FOR USE
Charging the speaker
To charge the speaker's built-in battery, connect the Type C power adaptor to the charging port. The appliance can be
used when plugged in for recharging.
Connect your device
1. Turn on the speaker.
2. Put your device (mobile phone, computer, etc.) in pairing mode, search for devices, and select RB-SK460 when it
pops up.
3. No password is required to perform this operation. Note: The product can connect to one device at a time only.
4. If the speaker is not connected to the device: please check that the speaker is in pairing mode and the search
function of the device is on.
TF Card
Insert your TF card into the corresponding slot to start playing tracks from the cards directly.
Without a TF card inserted, the device powers in wireless mode by default. With a TF card inserted, the device powers in
TF mode by default.
TWS Function
1. When the two speakers are powered on, long press the "M" button until you hear
light starts flashing.
2. When the speaker is paired, press and hold M button again to disconnect.
To note: if you hear an alarm sound coming from the device during playback, it is recommended to connect the charger
and recharge the device.

MAINTENANCE AND STORAGE

First, make sure the charging cable is not plugged in. Secondly, the product must be turned off.
Cleaning and user maintenance shall not be made by children without supervision.
Do not wipe it with a wet towel/ paper towel or wash it with water to prevent the danger of short circuit. Use a soft, dry
cloth to clean the product. Use a dry cloth to wipe the surface. Do not clean the product with water or corrosives. Do
not use alcohol, thinner, benzene or other solvents to wipe the product. Avoid water or other liquids seeping into the
product. Do not expose the product to large amounts of water. Store the product in a dry environment. Cover it to
prevent dust. Keep the product dry.
The prompt tone confirms that TWS pairing is successful.
① Switch on / play / pause
② Volume + / next track
③ Indicator Light
④ TWS / TF modes
⑤ Volume - / previous track
⑥ TYPE-C charging port and TF card port
⑦ Microphone
⑧ Light switch
4
two prompt sounds and the blue