Special Function - Runpotec Rt2008 Gebrauchsanleitung

E 1
Insert plug-in attachment into pipe end.
F
Press the pushbutton until it latches
(CLICK!).
Rotation function
If you hit an obstacle that cannot
be overcome through normal pum-
ping, enable the rotate function,
which additionally causes the spiral
to rotate, in order ot overcome even
troublesome, problematic points.
B
Tighten the clamping handle clockwise.
The spiral is secured for subsequent
rotation.

Special function

For pipe lengths of 20 m and over, the ad-
ditional assistance of a cordless screwdri-
ver is recommended, as this makes it ea-
sier to overcome problem areas. Turn the
spiral with the cordless screwdriver only
in a clockwise direction.
I. Clamp handle open
II. Keep the cable taut
III. Optimal speed: 800–1200 rpm.
All images are representative. Changes and printing errors excepted.
RUNPOTEC GmbH – Irlachstrasse 31 – A-5303 Thalgau
Tel.: +43-6235-20 335 – Fax: DW 35 – office@runpotec.com
E 2
I II
Push the tube (I) in until it stops and
secure it with the red clamp ring (II).
G
Insert MET4 Metal spiral by pumping.
A
Extend the telescopic tube completely.
C
Turn and push the handle ratchet
alternately several times.
I
II
ENGLISH
7
III