DUROFIX RL6040 Bedienungsanleitung Seite 7

NOTE:
If the Uplight is run by battery pack, it could run another 2 Uplight at the same time.
INSTALLING OR REMOVING BATTERY PACK
Plug AC power cord (7) into the AC outlet.
NOTE:
When an AC cord is plugged, the Uplight will automatically run on AC power. If the Uplight is
run by AC, it could run another 9 Uplight.
LIGHT ON / OFF AND DIMMING
1. Inert battery pack or plug into AC power.
2. Release Locking nut to turn counting-clockwise.
3. Hold the top hanger (1) and fully pull out the LED uplight (2) until firmly seated.
4. Use dimmer (8) to adjust brightness (10~100%).
5. Push back the LED light to turn the light off.
NOTE:
Do not hand or hold and carry the uplight on the top hanger. It will damage it due to the uplight
weight.
WARNING
1English1
OPERATION
MAINTENANCE
Remove the battery pack from this tool before cleaning solutions.
English -6