AVM FRITZ!Smart Control 440 Bedienungsanleitung Seite 20

Menu
Use the Menu button to switch between displays or to open the menu.
Switch displays
Open the menu
Connect again
If you would like to reconnect FRITZ!Smart Control 440 or register it with another FRITZ!-
Box, proceed as follows:
1. Press the Menü button and hold it down for 2 seconds.
2. Press the button with the Anmeldung (Register) display.
3. Press the Connect button on your FRITZ!Box
or
Press the DECT button on your FRITZ!Box and hold it down for 6 seconds.
The connection will be established.
20
Press the Menü button.
FRITZ!Smart Control 440 has 4 displays. One display for the
temperature and 3 displays you can configure freely.
Press the Menü button and hold it down for 2 seconds.
In the menu you can rest FRITZ!Smart Control 440, start
registration, or open information on the version.