Product Introduction; Overview; Working Theory; Features - Autool Sdt205 Bedienungsanleitung

PRODUCT INTRODUCTION

Overview

Working
theory

Features

The AUTOOL SDT205 is an automotive smoke leak detector with
a visual pressure gauge that makes it easy to detect pipeline
leaks. The SDT205 offers dual testing modes: air mode and
smoke mode. In air mode, leaks can be identified through the
pressure gauge without the need to activate smoke. The smoke
mode is independently controlled by the smoke generator, allow-
ing precise localization of leaks once they are detected.
Any other use is considered beyond the intended purpose of the
equipment and is prohibited.
Low oxygen combustion
●
The AUTOOL smoke leak detector employs a forced combus-
tion smoke generation method in a low oxygen environment. It
is energized by a conductive column to the heating wire, which
rapidly heats up to more than 300°C so that the mineral oil
reaches the ignition point and enters the state of combustion.
Due to the small intake of air flow, it is insufficient to provide
sufficient oxygen to maintain full combustion, thus the combus-
tion mainly occurs on the surface of the heating wire. Subject
to high-temperature heating, the mineral oil retention object
can continue to burn insufficiently around the heating wire,
thus producing a large amount of smoke.
Built-in Air Pump
Overheat Protection
Pressure Gauge
Protection Indicator
Flow Meter
Flow Adjustment Knob
Oil Drain Valve
Liquid Level Gauge
Air Control Switch
6
Yes
Yes
Yes
Yes
None
None
Yes
None
Yes