Herunterladen Diese Seite drucken
Congratulations on purchasing your
brand new Octave Clang.
This pedal represents years of study and
experimentation to find the most messed up,
disgusting, glorious fuzz possible.
The Octave Clang is a pseudo-ring/distortion/noise/octave
pedal that creates its unique sound from a specially sourced
transformer and precision-matched diodes. This generates
extremely rich harmonics and pure totally analog octave up.
The octave effect is created by adding two out-of-phase
half-wave rectified copies of your signal together.
This works well for single notes, but when complex chords
and waveforms are presented to the circuit, it mangles and
twists them in an organic and beautifully chaotic way. Use
this pedal as a great distortion pedal with the octave off, and
then kick on the octave to bring down the house!
FOOT
SWITCH-ABLE
OCTAVE
The Octave Clang is powered by a standard 2.1mm 9V DC adapter with a
center-negative polarity and draws 10 mA of current. Isolated power supplies
are recommended. It is also possible to use the Octave Clang with a 9V
battery (not provided). When not using a battery, the internal battery snap
should be attached to the corresponding battery snap holes on the board. This
will prevent the contacts from shorting out against the circuitry. Do NOT leave
the battery snap floating inside the pedal when not using a battery.
Controls the output
Sets the gain of the
A powerful pre-gain
level. Goes from
Octave Clang. This
tilt EQ, this control
totally silent to
can (and will) drive
adjusts the amount of
the rest of the
extremely loud.
highs and lows going
When set above your
circuit into
into the rest of the
normal volume, it
overdrive and fuzz.
circuit. This can make
propels your chain
Can provide up to
the octave and fuzz
into overdrive.
+39dB of gain.
react very differently.
OCTAVE
BYPASS
RIGHT FOOTSWITCH
LEFT FOOTSWITCH
Toggles the Octave Up mode
Turns the Octave
(Yellow LED). The Yellow LED stays
on/off when the pedal is bypassed to
Clang on and off
indicate if the Octave Up is engaged.
(Red LED).
Allows misbiasing the distortion circuitry. Leave
this control in the middle (5-6) for standard
functionality, or turn it left or right to skew the
character of the distortion to a rougher sound.
Access this control by removing the backplate
of the Octave Clang.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
loading

Inhaltszusammenfassung für DBA OCTAVE CLANG V2

  • Seite 1 Congratulations on purchasing your brand new Octave Clang. This pedal represents years of study and experimentation to find the most messed up, disgusting, glorious fuzz possible. The Octave Clang is a pseudo-ring/distortion/noise/octave pedal that creates its unique sound from a specially sourced transformer and precision-matched diodes.
  • Seite 2 Das Octave Clang ist ein Pseudo-Ring/Distortion/Noise/Oktav Pedal, das seinen einzigartigen Sound über einen speziell dafür beschafften Transformator und präzise abgestimmte Dioden erzeugt. Dies generiert extrem reichhaltige Obertöne und eine völlig analoge höhere Oktave. Der Oktav-Effekt entsteht, indem zwei gegenphasige, gleichgerichtete Halbwellen-Kopien des Signals zusammengefügt werden. Das funktioniert gut für einzelne Noten, aber wenn der Schaltung komplexe Akkorde und Wellenformen präsentiert werden, verformt und verdreht sie diese auf eine organische und wunderschön chaotische Weise.
  • Seite 3 Octave Clang v2 můžete použít jako skvělý distortion bez přidané magnifiquement chaotique. Utilisez cette pédale comme une excellente pédale de prachtig chaotische manier.
  • Seite 4 El Octave Clang es un pedal pseudo-ring/distorsión/ruido/octava que crea su sonido único Octave Clangは特別にセレクトされたトランスフォーマーと精密にマッチングされたダ Octave Clang to efekt pseudo-ring/distortion/noise/octave, który generuje swój unikalny a partir de un transformador especialmente seleccionado y diodos emparejados con イオードからなる、非常にユニークなサウンドを生成する疑似リングモジュレーター/ dźwięk za pomocą specjalnie dobranego transformatora i precyzyjnie dopasowanych ディストーション/ノイズ/オクターブペダルです。究極にリッチなハーモニクスと、完...

Diese Anleitung auch für:

Octave clang