Bobrick B-2890 Technische Daten

Technical Data
MATERIALS:
Mounting Plate — 16-gauge (1.6mm) stainless steel.
Door — Type-304, 22-gauge (0.8mm) stainless steel with satin-finish. Slot reveals toilet tissue supply
inside cabinet. Equipped with a lock keyed like other Bobrick Washroom Equipment accessories.
Spindle — Removable rubber-o-rings converts to smaller spindle. Fixed inner spindle, 20 gauge
(0.9mm) stainless steel.
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions.
SURFACE-MOUNTED
SINGLE JUMBO-ROLL
TOILET TISSUE DISPENSER
Viewing Slot
Operable Part
1" (25mm)
Typ.
S
ADA/ICC Installation Guidance
*Operable Part: Toilet tissue dispenser opening on the bottom of the cabinet.
Mounting location of Operable Part:
ADA: 15" minimum (380mm) above finished floor (AFF). Centerline of dispenser
located 7" to 9" (180mm to 230mm) in front of leading edge of toilet.
ICC: 18" minimum (455mm) above finished floor (AFF). Dispenser outlet located
24" to 42" (610mm to 1065mm) from rear wall.
*For more information regarding operable parts, please refer to Bobrick Planning Guide for
Accessible Restrooms, page 9.
10-21/32"
(271mm)
9-1/8"
(230mm)
S
6-5/8"
(170mm)
S
3-1/8"
(80mm)
1-43/64"
(45mm)
3-11/32"
1/2"
(85mm)
(12mm)
S
Typ.
5-11/32"
(135mm)
B-2890
Finish Wall
Door
S
Lock
10-45/64"
(270mm)
4-29/64"
(115mm)
continued . . .
Revised 4/11/23
© 2023 by Bobrick Washroom Equipment, Inc.
Back Plate
Pivot Point