DUROFIX RM602-3 Produktinformationen Seite 8

BATTERY INSTALL AND REPLACEMENT
1. Prepare 2 new coin cells of "CR2032".
2. Loosen the 2 screws on the coin cell cover by
a screwdriver.
3. Replace the 2 coin cells (with the "+"sign
facing upwards).
4. Tighten the screws to fix the cover.
NOTE
1. When cell capacity is low, the digits on the display will be not clear.
2. Remove the coin cells if stored for a long period of time.
3. Keep spare coin cells on hand when going on a long trip or to cold areas.
4. Do not mix the type of coin cells or combine used coin cells with new ones.
5. Sweat, oil and water can prevent a coin cell's terminal from making electrical contact. To avoid this,
wipe both terminals before loading a coin cell.
6. Coin cell life depends on coin cell quality and the amount of buzzer is used.
7. Dispose of coin cells in a designated disposal area. Do not throw coin cells into a fire.
WARNING
Always remove battery pack before changing accessories or making adjustments.
POWER ON
Press and release the Power Button (3) to turn the adapter on.
ZERO FUNCTION
When powered on, the digital torque tool measurement can be zeroed by pressing the
Power Button (3).
NOTE
Do not use the zero function while the digital torque tool is being used.
HOW TO SET PEAK MODE OR TRACE MODE
Press and release the Down Button (4) or Up Button (5) to select the mode you need.
TRACE MODE: When in track mode the adapter will display real-time torque.
1English1
ASSEMBLY
OPERATION
To reduce the risk of injury, wear safety goggles or glasses with side shields.
English -7