Runpotec RC3 RUNPOCAM Gebrauchsanleitung Seite 14

ENGLISH
14
Operate monitor module with RUNPOTEC-APP
Connect RC3 monitor module to smartphone/tablet via wireless LAN
Make sure the RC3 inspection camera's wireless LAN is activated.
(Activate: see
Download the RUNPOTEC-APP - scan the QR code in the monitor
module (main menu settings - WLAN) or via your app store.
After installation, open the RUNPOTEC app.
On the home screen, click the „not connected" button.
Follow the on-screen instructions for the wirelss LAN connection.
Return to the home screen and activate photo/video mode on the
monitor module.
Home screen
V
I
III
IV
II
II
Camera mode
20 Adjust image resolution
21 Rotate camera image 180°
22 Switch between color and black and white mode
23
Split monitor - live image and most recently taken photo
24
Adjust zoom to 1.0x / 1.5x / 2.0x by clicking
25
Set photo or video mode
26 Photo / Video gallery
27 Take a photo / start/stop a video -
(automatically saved to the gallery)
28 Switch between front and side cameras
III
Manage gallery
31 Select a photo, video, or monitor module gallery
(Monitor module gallery: Data must be copied from the module
to the app to display it permanently)
32
Manage images/videos by clicking on them
(Save/Share/Delete)
All images are representative. Changes and printing errors excepted.
S T R O N G E S T C A B L E P U L L I N G T O O L S
E
main menu settings - wireless LAN - WLAN)
Camera mode
20 21 22 23
24
25
26
27 28
Gallery
31
32
I
Report
29
30