FLINQ Deluxe Edition Handbuch

EN Manual
Welcome to the FlinQ family
Register your FlinQ product
We can imagine you want to treat your FlinQ item
carefully. Register your product and you will be
entitled to the following:
1 year extra warranty (2+1)
Personal support
Digital warranty certifi cate
Digital manual
Scan QR or go to fl inqproducts.nl/registration
Canopy Installation
A
FlinQ & Co B.V. | Eemweg 74, 3755 LD Eemnes | Netherlands | www.fl inqproducts.nl | info@fl inqproducts.nl
1. Install accessories A
on the four corners of
the frame respectively.
Pay attention to the
installation direction.
2. Fasten accessory
A with the screws in
accessory C
3. Insert the straight
rod F of the accessory
into the hole in the
accessory A.
4. Install the roof of
accessory "I" on the
shelf supported
by four straight poles F
and fi x it with fastener.
FlinQ Folding Wagon 130KG – Deluxe Edition
Packing list
A. Plastic part
x 4
B. Screw kit
x 4
C. Screw kit
x 4
D. Wrench
x 1
E. Screwdriver
x 1
F. Support rod
x 4
Rear Pocket Installation
H
Push bar Installation
Adjustment of the push bar
Press and hold the button to adjust the height and
angle, release to lock in place.
G. Push bar
x 1
H. Side frame
x 1
I. Canopy
x 1
J. Storage bag
x 1
K. Pocket cover
x 1
1. Install H on the back
frame.
2. Install the back
pocket and secure with
fastener. Note: Needs
to be installed above
accessory A.
1. Use the long screw
of accessory B to install
and fi x the
putter.