Stockmaster TRACKER Bedienungsanleitung Seite 4

User Instructions - ENGLISH
Compliance
S
tockmaster Mobile Platform and Mobile Step Access Ladders comply with the relevant elements of standards
AS 1892.1 and EN 131
S
tockmaster Mobile Platform and Mobile Step Access Ladders exceed the performance requirements of standards
AS 1892.1 and EN 131 for classification "OUTDOOR USE" and "INDUSTRIAL" and/or "PROFESSIONAL" rating
S
tockmaster Ladders are Designed and Manufactured by:
CUSTOM LADDER COMPANY PTY LTD
29 LORN RD QUEANBEYAN N.S.W.
S
tockmaster Ladders are Distributed throughout the European Community by:
LINDELAUFER GEWANDE 30C
NL 6367 AZ VOERENDAAL
Model Numbers and date/s of Manufacture
T
his Information can be found on the labels fixed in the following locations;
�� The inside of the side rail of the ladder adjacent to the control handle.
�� Underneath the platform (indicates manufacturing date only)
�� Lift-Truk - On the base of the winch case (indicates manufacturing date only)
www.stockmastereurope.de
AUSTRALIA
EUROKLIM BV
THE NETHERLANDS
Design Purpose and Safe Operation
S
tockmaster Navigator
This product has been designed as a general purpose mobile platform ladder where an elevated work platform is
required, together with highly flexible mobility to allow the ladder to navigate in confined spaces. Typical use is
placement or retrieval of small light - weight items from racking or shelving, or retrieval of larger or heavier items which
do not require carrying down the ladder. An example is the selection of car tyres in a tyre retailer, when the tyre may be
selected and allowed to fall safely to the ground. DO NOT CARRY HEAVY OR LARGE ITEMS UP OR DOWN THE
LADDER.
When fitted with:
�� A Stability Leg. (EN131.7) Ensure Stabi-Leg is in the open position before use and ensure the locking pin is securely
positioned through both the actuator slide and the extendable leg. Return Stabi-Leg to the closed position before
relocating the ladder.
�� A Platform Safety Gate (Navigator Pro) always ensure the gate is securely latched before use.
�� A Side Opening Platform Gate (Navigator Pro) always ensure the gate is returned to the lock position and securely
latched after use
S
tockmaster Tracker
This product has been designed as a general purpose mobile platform ladder where an elevated work platform is
required, typically for maintenance and process inspection purposes as found in manufacturing. In the mobile state, the
platform surface is inclined from the horizontal and therefore THE LADDER MUST NOT BE USED TO MOVE LOADS.
Care must be taken to remove tools etc. from the platform surface before moving the ladder. A safety device has been
fitted to the ladder which removes the wheels from ground contact to prevent it from moving towards the operator
should it be lifted over centre. When moving the ladder, do not lift the Control Handle above waist height as this will
actuate the safety device and prevent forward movement of the ladder. DO NOT REMOVE THIS SAFETY MECHANISM.
When fitted with:
�� A Stability Leg. (EN131.7) Ensure Stabi-Leg is in the open position before use and ensure the locking pin is securely
positioned through both the actuator slide and the extendable leg. Return Stabi-Leg to the closed position before
relocating the ladder.
�� A Platform Safety Gate (Tracker Pro) always ensure the gate is securely latched before use.
�� A Side Opening Platform Gate (Tracker Pro) always ensure the gate is returned to the lock position and securely
latched after use
GO BACK
www.stockmastereurope.de
User Instructions - ENGLISH
GO BACK