Lakeland AIR FRYER Gebrauchsanweisung Seite 11

CHECKING YOUR FOOD
• We recommend checking your food during cooking and shaking ingredients gently
halfway through to prevent unevenly cooked food.
• Slide the pan and basket out of the Air Fryer using the handle.
• The Air Fryer will automatically go into 'pause' mode and the display lights will
go out, gently shake your ingredients. When the pan is replaced the cycle will
automatically continue.
• Do not use metal utensils with the pan and basket, this will damage the non-stick
coating, use heat resistant plastic or wooden utensils if you need to turn your food.
• When checking ingredients, place the pan and basket on a heat resistant
board.
• Check your food is ready. If not, slide the pan back into the cooking cavity and set the
time for an additional 5 minutes.
• When removing food, do not turn the pan and basket upside down as any hot oil
residue which has drained into the bottom of the pan will spill onto your food. Place
the pan on a heat resistant surface, remove the basket from the pan and tip your food
onto a plate or remove with tongs.
• Press and hold the POWER button
goes out.
• The motor fan may continue to run until the appliance has cooled down. When the fan
has stopped, switch off and unplug at the socket.
• Allow the appliance to cool down completely before moving, cleaning or storing.
• Temperatures and timings can be altered during the cooking
cycle if your food needs longer.
• 'Pause' the Air Fryer using the START/PAUSE button
there will be a beep and the time on the display will flash,
cooking is paused.
• Increase the time if needed.
• Press the TIME/TEMPERATURE set button
increase the temperature if needed.
• Press the START/PAUSE button
cooking cycle.
• When cooking has finished, the Air Fryer will beep and
the time will flash 00:00.
until the Air Fryer turns off and the power light
again and
again to continue the
,
11