VITURE 8BitDo Schnellstartanleitung

VITURE 1 8BitD0
EN
Ultimate
9
Gaming Controller
Start
The VITURE x 8BitDo Ultimate Mobile Gaming Controller
enhances your mobile gaming with ergonomic design,
Turbo Mode, and customizable back buttons.
It utilizes Hall joysticks and Hall triggers, offering higher
precision and extended durability. Crafted for versatility,
this controller is your ultimate companion for both casual
and competitive gaming sessions.
Select
Leff Bumper -
9
Left Stick •
Button/
Left Stick
• Right Stick
D-pad •
<JOc:,
Configuration • Status
Indicator
Turbo Button • • Home
USB-C port
• Power Indicator
Right Trigger • Left Trigger
P2
Requirements
1. Android 13 or higher is required.
2. Your Android device must support OTG. Check your device's
manual or the manufacturer's website to confirm.
3. Ensure your device supports mirroring to an external display. Scan
the QR code for a non-exhaustive list of devices compatible with DP
Alt Mode.
Connection
1. Hold both sides of the controller and pull it apart.
2. Place your phone into the expandable slot in the center, align it with
the USB-C connector, and insert the phone.
3. Ensure the phone is securely inserted and lying flat, then slowly
release the controller to grip the phone.
4. Your phone may prompt you to confirm enabling the
mirror display. Please allow mirroring to the external
display.
5. Connect your VITURE XR Glasses to the
USB-C port on the right side of the
controller.
USB Type-C
Turbo Function
Enable Turbo Mode
Turbo Mode
Hold the desired button and press the Turbo
button. The Turbo indicator will blink rapidly.
Enable Auto Turbo Mode
Auto Turbo Mode Disa
@+e4e
@+Ox2 -e (O
Hold the desired button and double-press the
Turbo button. The Turbo indicator will blink rapidly.
Note:
*The following buttons do not support Turbo Mode; D -pad, Leff/Right Stick, Select Start (4), Home, Pl, and
P2 buttons.
*Turbo functionality resets after powering off or disconnecting.
Mapping PIIP2 Buttons
P1 and P2 buttons are located on the back of the controller.
You can map single or multiple buttons to P1/P2.
Note:
D-pad, Left/ Right Sticks, Select (-), Start W),and Home buttons cannot be mapped. When a mapped button
is pressed, the configuration indicator will blink continuously.
Fast Button Swap
Swapping buttons will make the
configuration indicator blink when pressed.
Settings will reset to default after the
device is powered off or disconnected.
Nota:
D-pad, Left/Right Sticks, Select Start (4), and Home buttons cannot be swapped.
Charging While Playing
The controller automatically powers on when connected to a phone and VITURE XR Glasses.
When connected to the controller, your phone's battery may deplete slightly faster. However,
you can charge your phone while playing by connecting the controller's USB-C port to a power
source.
Safety Guidelines
1. The manufacturer is not responsible for safety issues caused by third-party accessories.
2. DO not disassemble, modify, or attempt to repair the device or battery.
3. Avoid crushing, piercing, or otherwise damaging the device or battery.
4. Unauthorized modifications or alterations void the manufacturer warranty.
VITURE
Mobile
8
Quick
Guide
VITURE x 8BitDo Ultimate
Start (+) Select •
Right Bumper
Button/
Right Stick
Indicator
Button
USB
1. Android 13
2. Android OTG
DP Ait Mode
2. USB-C
USB-C
port
Turbo Mode
Auto Turbo Mode
@+ex2
P1/P2
start
— , Home
VITURE XR
> S USB-C
1 8BitD0
8
VITURE x 8BitD0
Start (+) Select •
P2
l. Android 13
2.1% Android OTGO
3.
DP Ait Mode
2. 5 USB-C
•e
5. VITURE XR
USB-C
USB Type-C port
PIIP2
P1/P20
select Start Home
Select Start Home
VITURE XR
USB-c
4.
VITURE 1 8BitD0
8
VITURE x 8BitD0
Start (+) Select
Home
USB-C
p2
l. Android
2. fifi Android
DP Ait
3.
4.
5. VITURE
USB-C
USB Type-C port
Start (+)
Select Homes
PIIP2
,
USB-C
VITURE 1 8BitDo
Start (+)
• Homem
USB-C
p2
13
Mode
XR
USB Type-C port
@+Ox2
*Start G) i-n P2
, Start Home
(-) •Start (+) •FL Home
VITURE