M-WAVE 430265 Installationsanleitung
Fahrrad-wandhalter
Verfügbare Sprachen
Verfügbare Sprachen
BICYCLE WALL RACK
PARTS
A
B
1
2
3
1x
1x
4x
2x
4x
1
1
pull up spin
1
1
4) Screw in
8) Drilling 2x Ø 6 mm
Caution:
Be sure storage hanger is secure and not in a location where personal injury could result from the protruding hanger.
Make sure your wall is strong enough to support the full weight of your bike before mounting.
Max. load: 30 kg
Not suitable for bicycles with standard front mudguards, as the front wheel rests on the rocker in this area.
The possible swivel range depends on the handlebar and tire width.
The rear wheel must be securely secured in the rear wheel support provided.
art. 430265
4
2x
1) Mark the location
5) Stand up bike & put on rack
4
4
9) Nail in
A
2) Drilling 4x Ø 8 mm
6) Mark the position
2
2
10) Screw in
3) Nail in
7) Mark the position
B
11) Functions
3
3
3
3
B
Rotatable
almost 170°
3 way
directions
Max. load 30 kg
distributed by:
Inhaltszusammenfassung für M-WAVE 430265
- Seite 1 BICYCLE WALL RACK art. 430265 PARTS 1) Mark the location 3) Nail in 2) Drilling 4x Ø 8 mm pull up spin 4) Screw in 5) Stand up bike & put on rack 6) Mark the position 7) Mark the position Rotatable almost 170°...
- Seite 2 FAHRRAD WANDHALTER art. 430265 TEILE 1) Position markieren 3) Dübel einschlagen 2) 4x Ø 8 mm Löcher bohren Sicherung ziehen 4) Halter festschrauben 5) Fahrrad aufstellen & auf Halter heben 6) Position markieren 7) Position markieren fast 170° drehbar in 3 Positionen abstützbar...