Aicok ST-525 Bedienungsanleitung Seite 3

a plug of the correct type.
If the fuse in a moulded plug needs to be changed, the fuse cover must be refitted. The appliance
must not be used without the fuse cover fitted. If the plug is unsuitable, it should be dismantled
and removed from the supply cord and an appropriate plug fitted as detailed. If you remove the
plug it must not be connected to a 13 amp socket and the plug must be disposed of immediately.
If any other plug is used, a 13 amp fuse must be fitted either in the plug or adaptor or at the
distributor board.
PARTS
1. Bread slots
2. Frozen bread button
3. Reheat button
4. Cancel button
5. Loading handle with high lift feature
6. Browning control
7. Crumb tray
BEFORE FIRST USE
Carefully remove your toaster from its box. Remove all packaging from inside the toasting slots.
Position your toaster on a stable, secure, dry and level work surface away from the edge.
Connect the plug to a suitable power outlet and make sure that the power cord does not
overhang the work surface.
When you first use your toaster, there may be a slight odour as the heating elements warm up for
the first time. This is normal and not a cause for concern. To remove the odour, simply operate
your toaster for the first time without any bread in it.
CONTROLS
Browning control
The browning control regulates how much the bread is toasted—in other words, the colour of the
toast. Lower settings produce lighter toast and higher settings produce darker toast.
When setting the browning control, remember that dry or thin slices of bread will toast quicker
and require a lower setting. Moist or thick slices of bread will require a higher setting.
Cancel button
The toasting process can be stopped at any time by pressing the cancel button.
High lift feature
The high lift feature uses the loading handle to help you to remove the toast. When toasting has