Connections With Tv Using Hdmi (Digital) Cable - Samsung HW-J6001 Bedienungsanleitung

CONNECTIONS
+ Using the Bluetooth POWER On function
The Bluetooth POWER On function is available after you have successfully connected the Soundbar to a Bluetooth
compatible TV using TV SoundConnect. When the Bluetooth POWER On function is ON, turning the connected TV on
or off will turn the Soundbar's power on and off as well.
1. Connect the TV to your Soundbar using the TV SoundConnect function.
2. Press the Bluetooth POWER button on the Soundbar remote. ON - BLUETOOTH POWER appears on the
Soundbar's display.
•
ON - BLUETOOTH POWER : The Soundbar turns on and off when you turn the TV on or off.
•
OFF - BLUETOOTH POWER : The Soundbar only turns off when you turn the TV off.
● This function is supported by some Samsung TVs released from 2013 on.

CONNECTIONS WITH TV USING HDMI (DIGITAL) CABLE

1. Connect an HDMI cable (not supplied) from the HDMI OUT (TV-ARC) jack on the back of the product to the
HDMI IN jack on your TV.
2. Press the (Source) button on the top panel of Soundbar or the SOURCE button on remote control to select
the D.IN mode.
● HDMI is an interface that enables the digital transmission of video and audio data with just a single
connector.
● If the TV provides an ARC port, connect the HDMI cable to the HDMI IN (ARC) port.
● We recommend you use a coreless HDMI cable if possible. If you use a cored HDMI cable, use one whose
diameter is less than 14 mm.
● Anynet+ must be turned on.
● This function is not available if the HDMI cable does not support ARC.
HDMI Cable
(not supplied)
HDMI IN
DC 14V
HDMI OUT
(TV-ARC)
HDMI OUT
(TV-ARC)
HDMI IN
AUX IN 5V 0.5A
HDMI OUT
OPTICAL IN (TV-ARC)
18