Herunterladen Diese Seite drucken

Pyle PPHP844B Bedienungsanleitung Seite 3

Wireless bt streaming tragbarer pa-lautsprecher und mikrofonsystem

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 9
REMOTE CONTROL FUNCTIONS
1. Standby button
2. Select input signal
3. Mute button
4. Play/Stop button
5. Next song of USB/SD
6. Previous song of USB/SD
7. EQ solution
8. Increase speaker volume
9. Choose song number directly
10. Choose USB/SD signal directly
11. Decrease music volume
12. Repeat song
1
1
4
7
EQ
0
9
4
7
4
www.PyleUSA.com
2
3
MODE
5
6
8
11
SCN
10
SD/USB
12
1
2
3
5
6
8
9
TROUBLESHOOTING
Possible Cause
Fault
1. No input sound source.
No sound
2. Volume is too low.
Distortion
1. Volume too high.
of sound
2. Speaker may be damaged
1. Microphone plug is not fully
Karaoke
inserted.
2. Microphone switch is not on.
does not
3. Microphone volume knob is at
work
the lowest position.
1. The audio format in the U disc is
MP3
incorrect.
does not
2. Improper operation has caused
play
a process disorder.
3. USB disc is disconnected.
BUILT IN WIRELESS BT STREAMING FUNCTION
Press "MODE" button to choose the input signal source as BT channel when
starting the machine.
Please ensure the BT devices you want to connect is open. Then scan and connect
the speaker with the device. When the connection is successful, "tick" tone will
prompt. If the speaker can't be connected, please restart the speaker or the device
and try again.
After the mobile phone and the BT are successfully connected, you can play music.
To ensure continuous stability of the music signal, try to keep the BT and the
mobile phone facing one another.
This unit supports iPad, iPhone, Samsung, HTC, MOTOROLA, Nokia and other BT
mobile devices wirelessly transmitting audio. It supports stereo playing of A2DP.
The BT of the unit can be used up to 10 meters if there are no barriers.
Solution
1. Use a better music signal.
2. Adjust volume.
1. Turn down the volume.
2. If speaker is damaged, repair
or replace it.
1. Plug microphone properly into
the socket.
2. Turn on microphone switch.
3. Adjust microphone volume
properly.
1. Convert audio format into Mp3
format.
2. Reboot the machine.
3. Insert USB disc properly.
www.PyleUSA.com
5

Werbung

loading