Power Supply; Radio Operation; Cassette Operation - Trevi Rr 501Bt Benutzerhandbuch

POWER SUPPLY

AC Power Operation
1. Check the voltage rating of your unit against the AC main supply voltage.
2. Put the AC supply lead into the AC SOCKET to connect the AC autlet.
Note: Once plugged in the AC outlet, the battery of the unit will be cut off.
Battery Power Operation
1. Open the BATTERY COMPARTMENT door
2. Install four "UM-1" (Size D) or R20 batteries according to the indicated battery polarity.
Note: Before using with batteries, disconnect the AC Cord from the AC SOCKET.

RADIO OPERATION

1. Slide the FUNCTION SWITCH to RADIO position.
2. Select the desired radio band with the BAND SWITCH.
3. Tune in a desired station by turning the TUNING BUTTON.
4. Adjust the VOLUME CONTROL to your desired listening level.
TELESCOPIC ANTENNA
1. Extend the TELESCOPIC ANTENNA for optimum reception on FM.
2. The unit is equipped with a built-in ferrite antenna for MW (AM) and SW.
This built-in antenna is directional so reception from distant station may be improved
by rotating the unit

CASSETTE OPERATION

Installationof Cassette
Open the CASSETTE COMPARTMENT by pressing STOP/ EJECT BUTTON. Insert the recorder
cassette, bottom side up with tape facing you. Close the CASSETTE COMPARTMENT.
Now the unit is ready for operation.
USB/SD/WIRELESS OPERATION
- USB/SD/WIRELESS: Use the FUNCTION switch to select the wireless/MUSIC function.
- Wireless: Press and hold PLAY/PAUSE to activate wireless pairing. Activate wireless
function on your smartphone/tablet as well and pair with the "RR501BT". You can
now stream audio from your smartphone/tablet over the RR 501 BT's speakers.
- USB/wireless: Insert USB or SD drives into the respective slots. The playback starts
automatically. Use the buttons PREV, PLAY/ PAUSE and NEXT to operate the music
playback
Playback
1. Set the FUNCTION SWITCH to Tape position.
2. Press the PLAY BUTTON. The unit will begin to playback.
3. Adjust the VOLUME CONTROL to the desired sound level.
Fast Forward and Rewind
To play back the desired position in the middle of the tape or to skip over portions of the
tape quickly. Press STOP/ EJECT BUTTON first and then press FAST FORWARD BUTTON for
winding or the REWIND BUTTON for rewinding, press STOP/ EJECT BUTTON to stop the tape.
9