Renkforce RF-4453520 Bedienungsanleitung Seite 2

Operating Instructions
Universal car mount for smartphones,
tablets and navigation systems
Item no. 2226760
Intended use
The product is intended for mounting a smartphone, a tablet computer or a navigation device
to the windshield inside a car. The suction cups are also suitable for slightly uneven surfaces
such as tiles, floor tiles or sand-blasted glass. The product features two ball joints that allow for
the mounted product to be aligned individually.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged.
Read the instructions carefully and store them in a safe place. Make this product available to
third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Universal car mount
• Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
on this page. Follow the instructions on the website.
Explanation of symbols
This symbol is used to highlight important information in these operating instructions.
Always read this information carefully.
This symbol indicates special information and advice on how to use the product.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
• Consult a technician if you are not sure how to use or connect the product.
• Maintenance and repairs must be done by a technician or a specialist repair
centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
All manuals and user guides at all-guides.com Operating elements
3
Operation
1. Make sure both suction cups (3), the installation surface and the surface of the device to be
2. Place one of the suction cups on the installation surface and apply some pressure.
3. Push the locking lever (2) toward the installation surface so that the suction cup adheres to
4. Press the rear side of the device to be mounted against the other suction cup.
5. Push the locking lever towards the device in order for the suction cup to fasten. Make sure
6. Loosen both set screws (1) and align the device as desired. Then refasten both set screws.
7. In order to remove the suction cups from both the installation surface and the mounted
Maintenance and cleaning
• Clean the suction cups every 4 to 6 months with a slightly damp cloth. In order to do so,
• Use a dry, soft and clean cloth to clean the plastic components. You can use a long-haired,
Disposal
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Load.............................................. max. 3 kg
Operating conditions ..................... 0 to +45 ºC, <80 % RH
Storage conditions ........................ 0 to +45 ºC, <80 % RH
Length........................................... max. 90 mm
Suction cup Ø ............................... 46 mm
Weight .......................................... 66 g
1 2
2 1
C hoose an installation surface that will not impair your visibility of the road or cause
distraction during driving.
Observe any legal limitations concerning the use of mobile phones, computers and
navigation devices in cars.
Do not exceed the permissible maximum load of 3 kg.
Do not attach any items to the product that are particularly valuable or fragile.
Attention, not suitable for the following products:
Sony Z2 / Z3 (products with glass body).
mounted are clean, grease-free, dust-free and dry.
the surface. Make sure that the suction cup is well fastened.
that the suction cup is well fastened.
device, lift up the respective locking lever.
N ever use any aggressive cleaning agents or chemical solutions.
remove the product from the installation surface or take the device, if mounted, from the
suction cup. Use a mild cleaning agent to clean off tougher dirt. Let the suction cups dry
completely before re-attaching them to the installation surface or, respectively, attaching the
device to the product.
soft and clean brush and a vacuum cleaner to remove dust.
At the end of its service life, dispose of the product according to the relevant
statutory regulations.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
3
1 Set screw
2 Locking lever
3 Suction cup
*2226760_v1_0420_02_jc_m_4L