Assembli Geigenkafer Gebrauchsanweisung

Clean hands in this stage will be very
convenient for a nice final result :-)
2
Please be careful and gentle
with bending and installing
the paper parts!
8
7
®
www.assemblishop.com
D
Desk stand + Wall display
B
C
A
3
9
Use the desk stand /wall display or
install directly on the wall using
this hole for nails.
esentation tip:
Pr
Finished your sculptures? Mount onto the wall, with or
without the included display panels or even better.... find a
photo/mirror/painting frame and create your own unique
display for the insects. Check out #assembli and our
website to discover some examples and inspiration.
Nr. 18
Insects
Violin beetle
Instruction sheet Read first!
Important! The cardboard and paper parts are fragile so please work
carefully, don't squeeze or force the parts for best result. Start with
building the cardboard skeleton frames. The illustrations will lead you
through the process.
Find French & German instructions
and some assembling video's
for more visual inspiration
on our website.
Note for the metallic paper parts: When removed, bend them
only a little bit to curl the part lightly to reach the desired effect.
top
bottom
1
4
6
5
!
First part 3 and
1
then part 4.
Others in the collection:
Honey bee
Jewel beetle
Swordtail butterfly Anisoptera dragonfly Giant silk butterfly Praying mantis
Insert part 2 in a light angle so the bump is not in your way. Hold as
illustrated to prevent damage. Click the bump trough the slot to finish.
2
5
6
Both go in the same slot. Insert paper part first
3
and then the cardboard part.
The paper part should be centered like this.
Firefly
Bumble bee Ladybug
Scarab beetle Birdwing butterfly Stag beetle
Paper wasp
Rosalia Beetle