Pyle PDA69BUEU Benutzerhandbuch Seite 5

7. CONTROL PANEL BUTTON
A. These buttons are only used to control the USB/SD, Wireless BT and FM functions
and doesn't control other functions.
B. MODE BUTTON: Press this button to select one from USB/SD mode, FM mode or
Wireless BT play mode. USB/SD mode will be set automatically after turning ON
the unit. Automatically plays mp3 les after inserting a USB ash drive or SD card.
You cannot select AUX, CD and DVD input on this button.
C. Each press of the PLAY/PAUSE BUTTON causes the operation to change from play
to pause or from pause to play in the USB/SD mode or Wireless BT mode.
Press the PLAY/PAUSE BUTTON one time to auto scan all frequencies from 87.5MHz
to 108MHz in FM mode. Press the button to auto scan channels when you use FM
radio for the first time. After stop searching, the unit will auto store all the radio
channels and play from the first radio channel. You don't need to rescan every FM
radio start up.
D. PREV and NEXT BUTTON: Use these two buttons to select previous, next track or
folder, depending on these different modes as below.
In USB/SD mode: Use to select previous or next track, or use to select previous or
next folder in FOLDER working mode.
In Wireless BT mode: Use to select previous or next track.
In FM mode: Use to select previous or next radio channel.
8. INPUT SELECTOR
Select MP3/BT input mode if you want to play USB/SD/Wireless BT/FM Radio.
Select CD input mode if you want to play CD jacks input signal. Select AUX input
mode if you want to play AUX jacks input signal. Select DVD input mode if you
want to play DVD jacks input signal, otherwise the unit output has no signal.
www.PyleUSA.com
5