Switching Off The Alarm Signal; Snooze Function - Raddy Pt-5 Benutzerhandbuch

Setting the daily alarms
 In normal mode, touch and hold the "
to turn the alarm ON or OFF. The "
function is ON. Touch and hold the key again to turn it OFF.
 In normal mode, press the "MODE" button once to display the alarm
time. Within 5 seconds, press and hold the "MODE" button for 2 seconds.
The hour of the alarm will start flashing. Use the "+" and "-" buttons to
set the hour.
 Press the "MODE" button to confirm the hour, then set the minute
using the same method
 Press the "MODE" button to confirm the minute and end the setting
procedure.
F.Y.I.:
 If there is no valid operation within 20 seconds, it will automatically
return to normal time mode from the alarm time set mode.
 The alarm will sound for 2 minutes if you do not deactivate it by
pressing any button. In this case the alarm will be repeated automatically
after 24 hours.
 Rising alarm sound (crescendo, duration: 2 minutes) changes the
volume 4 times whilst the alarm signal is heard.

Switching off the alarm signal

 When the alarm is ringing, press any button except the "
button to stop the alarm. The alarm will ring again the following day.

Snooze function

 When the alarm rings, touch the "
snooze mode. The alarm will sound again after 8 minutes.
RF Transmission procedure
 The RX will automatically start receiving transmissions from the remote
sensor after batteries are inserted.
 The remote sensor will automatically transmit temperature signal to
the RX station after batteries inserted.
 If the RX fails to receive a signal from the remote sensor ("- -.-"display
on the LCD), press and hold "CH" button for 2 seconds to to manually
PT-5 User Manuals
" icon will appear when the alarm
4
" key for 2 seconds
" button to activate the
"