WJG McVoice MK-209 RF color Bedienungsanleitung Seite 8

• Attach the antenna to the receiver that it has a vertical position.
• Connect the receiver with its power supply and the power supply with an electric outlet. Now the
receiver is ready for operation.
• Attach the receiver to an external monitor or TV with the audio / video-cable.
• Connect the TV or monitor with an electric outlet.
• Switch on the computer or the TV respectively and select the AV mode.
• Adjust the receiving channel of the receiver that it matches the transmitting channel of the camera.
• If more than one camera is involved put [4] to LOOP and it is possible to choose the automatic receiving
channel change (CHANNEL LOOP) with [3].
• Now the transmitted picture should be shown on the screen.
• Adjust the brightness, the contrast and the color at the monitor or the TV respectively that there is an
optimal picture produced.
ETT Distribution GmbH Schmalbachstraße 16 38112 Braunschweig
Nachdruck oder Vervielfältigung nur mit ausdrücklicher Genehmigung
099-080