Seite 3
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Weiterhin möchten wir sie auf eine Besonderheit bei dem Einbau der FMC-05-, FMC-06- und FMC-07-Erweiterungen hinweisen, die nicht in den Yamaha-Bedienungsanleitungen steht (siehe Skizze auf Seite 2): Bevor Sie die FMC-05-, FMC-06- oder FMC-07-Erweiterung auf den Anschlußsockel auf dem Mainboard drücken, müssen Sie die beiden...
Seite 5
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Tighten the distance bolts with your hand. It is not necessary to use a special tool for this procedure. Then plug the FMC-05 / FMC-06 expan- sion carefully (see the sketch) into the 120pin connector socket on the main board.
Seite 6
1G-Clock technology. Thus, you can conduct the digital master signal of your Yamaha workstation through the MC-3+ to enhance its transparency, spaciousness and richness of details clearly audible. MUTEC GmbH · Fon 0049-(0)30-74 68 80-0 · contact@mutec-net.com · www.mutec-net.com...