Getting Started - Modecom Volcano Schnellstartanleitung

E. Reset
7. select
8. Mode switch
9. Direction jog
10.LEDlight
II. microlJSB

2. Getting started

2.1Battery 6 charging
The battery inside the gamepad is integrated with the hardware. Do
not attempt to remove or replace the battery. This will violate warranty
terms.
The led light will turn red when the battery will need charging. Connect to
USB port in PCvia USBcable or to 5V adapter to charge the battery. A full
charge takes about 1.5 hours. When charging the led light will turn red.
When battery is fully charged the led light will turn Off. After charging is
completed please remove the USBcable.
2.2 Turn on/off
Toturn on - press and hold Start/Power button for 3 sec. You will see the
led light flashing in blue.
Toturn off - press and hold Start/Power button for 3 sec. You will see
the led light disappear. The device will power off automatically after 3
minutes if no Bluetooth
2.2.1Connecting to smartphone / tablet
To connect first turn on the gamepad. Then turn on Bluetooth in your An
droid device Settings menu. Start scanning for Bluetooth devices nearby.
Select the gamepad to pair. Connection will be established automatically
and the led light will turn off.
MODECOM
To reset the device.
In Android menu: Options
In games:depending on
the game
TO switch between Modes.
In Android menu: to move
around
In games:To control mo
vements
Indicating established connection / the need to recharge
battery.
TOrecharge the built-in battery.
connection is established.
Volcano Mini-Gamepad
To activate mouse
cursor (press8 hold for
3 set). To deactivate
press8 hold again.
Next/Previous file in
Music and Video
To control mouse cursor