Cooking; Delayed Start - Nostalgia Rmo4 Serie Bedienungsanleitung

COOKING

During the cooking cycle, press and hold the MICRO POWER button
to show the current cooking power. When you release the MICRO
POWER button, it will return to show the remain cooking time.
During cooking, you can increase, decrease, or select the auto
cooking menu by turning the PROGRAM DIAL.
MULTI-SEQUENCE COOKING
You can program up to four separate cooking sequences for each cooking
program. This is useful if you need to cook something at different power and
time settings (ex. 10 minutes at 100 P, 10 minutes at 80 P, 5 minutes at 20 P).
The maximum time for each cooking sequence is 60 minutes.
1. First, select the power level by pressing the MICRO POWER button. Then
use the PROGRAM DIAL to set the desired cooking time for that sequence.
You must select the time or you cannot go on to the next step.
2. Press the MICRO POWER button again to add another sequence. Once
programmed correctly, the microwave will beep two, three or four times
noting that it is ready to begin programming the next sequence.
3. After you have set the desired number of sequences,
press the INSTANT START to start cooking.

DELAYED START

1. After selecting a cooking program and cooking time, while LED Display is in clock mode,
press & hold the PRESET/CLOCK/DEFROST button for three seconds. It will go into the
delayed start function which allows you to select the time that you want to start cooking.
The number(s) to the left of the ":" will flash, but the numbers to the right of the ":" will not.
2. Turn PROGRAM DIAL clockwise or counter-clockwise to change the hour. Press PRESET/
CLOCK/DEFROST button again to set the minutes. The numbers on the right side of the
":" will flash, and the number(s) on the left hand side of the ":" for the hour will not.
3. Turn the PROGRAM DIAL clockwise or counter-clockwise to change the
minutes. Once you have finished selecting the time you want to start cooking,
press the PRESET/CLOCK/DEFROST button to confirm. Your selected cooking
program will now begin automatically at the time you have set.
4. If you have programmed the delayed start cooking time correctly, the
time on the LED Display will flash. The flashing will stop once the clock
has reached the time you have programmed for cooking.
5. If you want to check the time that you have preset for cooking, press and hold the PRESET/
CLOCK/DEFROST button. The time that you have selected will be displayed. When you
release the PRESET/CLOCK/DEFROST button, the LED Display will go back to CLOCK mode.
6. When in delayed start mode:
• If want to start cooking immediately, press the PROGRAM DIAL.
• If want to cancel the preset cooking time, press the PAUSE/CANCEL button.
NOTE: The time that you select must be at least 10 seconds in advance,
or the automatic delayed start setting will NOT work. The clock
must be set in order for the Delayed Start feature to work.
12