Height Adjustment - Timago Bathtim Benutzerhandbuch

• Legs with suc�on cups should be mounted on the same side as armrest
(picture 1).
Step 2. Fix tubes in seat openings (picture 2). Make sure that both locking pins
are locked. Turn frame with seat on a side. Put backrest frame through openings
located at the back of the seat un�l locking pin clicks (picture 3).
• Backrest has two level length adjustment (picture 3). Press locking pin and
set appropriate length.
Step 3. Put bench on its legs and fix armrest into openings (picture 1). Secure
handle with locking pins.

HEIGHT ADJUSTMENT

To adjust bench height, press locking pin and set appropriate height for the
user and lock it with a pin again. The legs are adjustable in 1 cm increments. All
legs has to be set on the same height level.
4. Technical data
Seat dimensions
Adjustable height
Maximum capacity
5. Notes
Timago Interna�onal Group does not bear responsibility of improper use of the
bench, failure to comply safety regula�ons and misuse.
6. Maintenance
• Clean the bath bench regularly using only water, sponge and mild detergents
for plas�c materials such as soap. Dry thoroughly.
Weight
67 x 41 cm
49,5-66 cm
4,70 kg
21
136 kg