FAAS G80 Benutzerhandbuch Seite 9

INSTALLATION
Warning: Before installing the accessories, the machine must be
powered off!
1. The main body connects, extension tube and then connects the
floor brush (Picture 1)
Click
2. The main body connects directly to the 2-in-1 crevice
nozzle/round brush (Picture 2)
5
Click
Quickly remove
the switch Press
Picture 1
Click
Picture 2
1. Select the appropriate brush head to connect with the main
body.
2. Press the first to start the first slow speed.
• Press the second to start the second speed.
• Press the third to stop vacuuming.
3. The red light is on when charging, and the green light is on
when fully charged.
Fault resolution
Removal
Cannot switch on
Reduced suction
power
INSTRUCTIONS
TROUBLESHOOTING
Analysis The solution
Recharge and use
Battery dead
again
Forget to
Press the switch
pressing the
again to turn on
switch
Contact the after-
The product is sales service
faulty department for
assistance
Dust cup is full
Clean the dust cup
or the filter is
and filter in time
clogged
Clogged brush Clean the clogged
head brush head
6