Smarttech DVB-T2/S2/C Bedienungsanleitung Seite 3

Insert the stand into the bottom
Connect the power cord into a suitable
switch on.
Switch on the TV by pressing
of the TV or on the remote
(The LED will change from red to green)
Th
First Time Installation
1 .TV will enter First Time Installation
select SETUP) First Time
2. Follow the on-screen steps
and channel scan.
Note:
Picture for reference purposes only; Please prevail in kind.
of the LED TV body.
wall socket and
Q)
the power button on the side
control.
hstauaüm
English
Mode
Auto
(or press MENU on remote,
Installation)
to setup language, country
EN
Insert the aerial
1 .Open the battery compartment
2.1nsert two 1.5V batteries
3.Close the battery compartment
TV Buttons:
Note: The key instructions
Display Hide key icon; When there is no button
icon will pop up like the picture shows above. the key Icon will automaticalty
seconds of inactivity.
Icon selection: Short press the button,
Icon function selection:
Icon Description:
- Power off Icon. Corresponding to the "POWER' button of remote
_ Menu Icon' Corresponding
_Source Corresponding to the "SOURCE• button Ofremote.
- Icom Corresponding to the •CHt" button of remote.
: CH- Icon: Corresponding
Volume* Icon:
- Volume- Icon; Corresponding to the
Specifications:
Screen Size
3g"/40v
cable into the RF socket.
cover on the back side;
Of AAA type with correct
cover on the back side
are subject to below.
popping up, press the key, the key
the BOOP to the right, select the icon,
Long press the key to achieve the function of the selected icon.
to the •MENU' button of remote.
to the •CH-• button of remote.
to the "VOL+" button Of
button Ofremote.
power Consumption Main accessories
36W/4BW
36W/48W
36W/4BW
36W/48W
User's manual
56W/65W\100W
Remote
60w/70w/76w
power cord xl
67W/70W\95W/foow
AAA Batteries
65w/80w
100W\108W/135W
15gW\165W/195W
polarity.
turn off after 5
xl
controller xl