Cleaning And Maintenance - Workpro Sds-Plus Bedienungsanleitung

HOW TO USE
To use a masonry drill bit, follow these simple steps:
1. Always firmly secure the workpiece in place before commencing
drilling.
2. Before starting drilling, mark the hole center point with a marker.
3. Determine the size of the hole you need to create. Use a tape
measure or ruler to measure the diameter of the needed hole.
4. Select the masonry drill bit with the appropriate size for the hole
diameter needed.
5. Use a power drill driver that allows for adjustable speed settings,
release the drill bit clamp mechanism and attach the needed masonry
drill bit securely to the drill chuck, ensuring it is centered and tightened.
6. Choose the rotation mode operation and appropriate speed.
7. Place the center point of the masonry bit on the marked working
surface, now adjust the angle of the drill. It should be perpendicular to
your workpiece.
8.Now to start drilling, switch on the power button and let the drill bit do
the rest. While drilling, ensure that the rotary hammer drill is held firmly
by using both hands and maintaining a balanced stance.
To use a chisel bit, follow these simple steps:
1. If needed, mark the line with a marker.
2. Select the appropriate chisel bit for the chipping needed.
3. Use a power hammer drill driver that allows for adjustable speed
settings, release the drill bit clamp mechanism and attach the needed
masonry chisel bit securely to the drill chuck, ensuring it is centered and
tightened.
4. Choose the hammer mode operation and appropriate speed.
4. Adjust the chisel working angle, then place the chisel bit on the marked
working surface.
5.Now to start chipping, switch on the power button and let the chisel bit
do the rest. While chipping, ensure that the rotary hammer drill is held
firmly by using both hands and maintaining a balanced stance.
GB

CLEANING AND MAINTENANCE

1. After use, wipe the drill and chisel bit clean with a brush or soft cloth and
lubricate it with a light oil.
2. Store the drill and chisel bit in a dry, clean place, away from moisture and
dust.
3. Check the drill and chisel bit for signs of wear or damage regularly.
Replace any bits
that are worn, dull, or damaged.
4. Always handle the drill and chisel bit with care and avoid dropping or
throwing it.
The above information is provided to help you use and maintain SDS-PLUS
hammer drill and chisel bit set properly. Please read and follow the
instructions carefully to ensure safe and effective use of the tool.