senya EASY TEA Gebrauchsanweisung Seite 31

icons except the Power key(9) will turn off. You can activate them by pressing the Power
key.
7. Short press the Menu selecting key(8) to select the menu(2-3-4-5-6) you want, the
selected icon will flash and Temp display shows its programmed temperature. After 2s the
appliance starts to work, all icons turn off except the selected one. When the water
reaches the programmed temperature, the appliance will beep twice and stop working, all
icons light up and will turn off again after 30s.
8. Press the Power key to cancel the appliance working if you want.
9. Fast operation:
10. When all icons on, press Power key once, the appliance will work according to the last
selected memu
11. When all icons off, press Power key twice, the appliance will work according to the last
selected memu
III.2.2 Keep-warm function
1. Short press the Menu selecting key to select the menu, then long press the Menu selecting
key for 2s, the selected menu and the keep warm icon will both turn on, now the appliance
enters the keep-warm mode.
➢ The appliance will work till the water temperature reaches the programmed one.
➢ When the water is cooled down to 5
appliance will work automatically to reach the programmed one again.
2. The keep-warm function lasts 2 hours maximum
3. Long press the Menu selecting key or short press Power key to cancel the warm-keep
setting.
III.2.3 Memory function
1. The appliance will remember your last selected menu. For a new use, if you want it to work
according to the last selected menu, just press Power key and the appliance will start to
work.
2. When the appliance is in keep-warm mode, you can remove the kettle and then put it back
on the base for maximum 10 times, memory setting will not lose. However, the pre-
condition is that when you put it back on the base, the real water temperature should not
be 8 C lower than the programmed temperature, otherwise the memory setting will lose.
°
IV- CARE AND STORAGE
Cleaning
➢ Cool the kettle before cleaning
➢ Always remove the plug from the supply before cleaning the kettle.
C lower than the programmed temperature, the
°
30