Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1.Please be sure to follow the instruction manual beforeoperations;
Before using
2.Prepare a towel on the seat bench to prevent sweatfrom dripping onto it.To
avoid affecting the quality andbeauty of wood.
1.Please unplug the power plug in time;
After using
2.Open the door to let the heat and humid water vapordissipate and keep the
sauna cabin dry.
1.The outer cabin can be wiped with a wrung wet towel;The inner cabin can be
wiped by small vacuum cleaner.
Stain on wood
2.Do not use organic solvents to decontaminate,such
asgasoline,alcohol,etc.wipe the sauna surface;
3.Do not use sharp objects in sauna cabin to preventscratching woods.
1.Wipe the glass with soft paper;
Stain on glass
2.Stubborn stains can be wiped with a damp cloth,thendry with a dry cloth;
3.Do not scratch the surface with a sharp object to preventscratching the glass.
1.Avoid water,snow and intense impact during thetransportation;
2.Do not store it in a humid environment;
Transportation
3.The northern climate is relatively dry,often wipe theproduct with a wrung wet
and storage
towel;
4.The climate in the south is relatively humid and can beventilated and dried
frequently.
Number
Problems
Indicator light for
1
powersupply not
working
Indicator light for
2
function is not
working
Maintance
Trouble shooting
Possible reasons
The connector is not
connected properly.
No power supply input.
Indicator light is broken.
The heating indicator light is
broken.
The circuit board or
components are broken.
The temperature sensor is
broken.
- 13 -
Countermeasure
Check the connector or replace a
new one.
Chick the circuity ( especially
weather there is power supply
input).
Replace the circuity panel.
Replace the relevant control
panel.
Replace the circuit board.
Check if the connect is loosen
and replace it.
Werbung
