Create RETRO STYLANCE S Benutzerhandbuch Seite 8

BEFORE USE
Operate the toaster
move the last traces from the manufacturing
ted by the toaster when it is used for the first time.
PREPARATION
I. Put the appliance
2. Put the plug into the wall socket.
TOASTING BREAD
1. Set the browning with the adjustment
• The browning is lowest when the dial is set to the lowest position.
• The browning is highest when the dial is set to the highest position.
• In the event of doubt, always begin at a lower setting.
• Older bread will need to be toasted at a lower setting than fresh bread.
• Brown bread will need to be toasted at a higher setting than white bread.
2. Put two slices of bread in the bread toasting slots.
3. Lower the bread carriage by pressing the lever until the lever locks into place. The indi-
cator light lights up. The appliance will now start toasting the bread; it will automatically
switch off once the toast is ready. The bread carriage will then rise automatically.
4. Remove the toast from the toasting slots.
5. Remove the plug from the wall socket.
6. Allow the toaster
the toaster's base.
WARNING: You can stop the toaster at any time you require. Press the 'Cancel' button to stop
the toaster.
• Switch off the toaster by pressing the 'Cancel' button if smoke is emitted from the toaster
or the bread.
• If toast remains caught in the toaster, then you should remove the plug from the wall socket
and allow the toaster to cool. You can now carefully remove the toast from the toaster. Do
not use sharp and/or metal implements.
REHEAT FUNCTION
This toaster also has a reheat function. Once you have lowered the bread carriage by press-
ing the lever, press the 'Reheat' button. By pressing the button, the 'Reheat' indicator light
will get illuminated.
DEFROST FUNCTION
This toaster also has a defrost
you have lowered the bread carriage by pressing the lever press the 'Defrost' button. By
pressing the button, the 'Defrost' indicator light will get illuminated.
8 ENGLISH
OPERATING
a couple of times, without
on a stable and flat surface.
to cool down before
function.
INSTRUCTIONS
bread, at the maximum
process. A little smoke and odour may be emit-
dial.
storing it. Wrap the power cord around
You can use this to thaw deep-frozen
setting. This will re-
the lugs on
bread. Once