Werbung
12
TC ICON DOCK
Operation
After mounting the Desktop Controllers securely into the TC ICON DOCK:
(EN)
1.
Connect the supplied power adapter to the TC ICON DOCK.
2.
Connect the USB from the TC ICON DOCK to your computer. There are no drivers to install. The TC ICON DOCK is based on standard and proven USB-hub
technology and therefore integrates seamlessly with all MAC and Windows computers.
3.
Check that the installed controllers are all operating correctly with your DAW.
4.
If no controllers are working, check that the supplied power adapter is connected correctly. Check that the USB cable is correctly inserted to the unit
and the computer.
5.
If any individual controllers are not operating, unplug all connections from the TC ICON DOCK, and check the USB connections to the controller.
(CN)
将桌面控制器牢固地安装到
6.
将随附的电源适配器连接到
7.
USB
TC ICON DOCK
将
从
连接到您的计算机。没有要安装的驱动程序。
MAC
Windows
有
和
计算机无缝集成。
8.
检查安装的控制器是否都与您的
9.
如果没有控制器工作, 请检查提供的电源适配器是否正确连接。 检查
10.
如果任何单个控制器未运行, 请从
TC ICON DOCK
后:
TC ICON DOCK
。
DAW
一起正常运行。
TC ICON DOCK
上拔下所有连接, 并检查与控制器的
TC ICON DOCK
基于标准且经过验证的
USB
电缆是否正确插入本机和计算机。
USB
连接。
USB
集线器技术, 因此可与所
Werbung
