ProfiOffice BINDSTREAM M28 PLUS Bedienungsanleitung Seite 2

GB
Dear customer,
Thank you for choosing a binding machine from ProfiOffice GmbH. We are sure that this
device will serve you well. Please spend some time to study its manual in order to make sure
that you will work with the "Bindstream" safely, easily and adequately.
Overview main component parts
1. Comb type board
2. Draw ring board
3. Hull
4. Adjustable punching depth
5. Paper fastener
6. Punching area
7. Base
8. Paper waste case
9. Handles
10. Knife punch switch
Scheme of punching and binding
Punching
A
Lo cate the paper fastener according to the size
of paper to be bound, then insert the paper
(max. 28 sheets of 80 g/m² density), making
sure that the paper touches the paper fastener
and goes all the way to the back of the machine.
Make sure that all pieces of paper are lying ex -
actly on top of one another. Press down the
handle to its base to punch the paper, then re -
lease the front handle and remove the paper.
Binding
B C D
1. For choosing an appropriate binding comb
please refer to the table in this manual, the
label on the machine, or on the boxes of our
combs.
2. Put the rubber ring with its opening upward
behind the comb type board (1), then carefully
push the back handle (9) backwards so that
the rubber ring is half open.
2
B
Sincerely, ProfiOffice GmbH