CONNECTGO CG004 Kurzanleitung

Storage / Contact
1. Note: the lifespan of this system is subject
handled careful y during assembly, dismantling
as damp can shorten the life.
For any technical information relating to this product,
contact@festive lights-com. We aim to respond
our help line on (01257) 792111.This service is available
Rangement / Le Contact
1. Noter que a durée de vie de votre installation
vous en prendrez soin. Manipu er avec délicatesse
que Ie rangement. 2. Essuyer parfaitement
la durée de vie de votre produit.
Pour toute information technique concernant
sur contact@festive-lights.com. Nous vous répondrons
pouvez aussi nous téléphoner au +44 (0)1257 792111.Service disponible
Lundi au Vendredi.
Aufbewahrung / Kontakt
1. Bitte beachten Sie: Die Lebensdauer dieses Systems
lung. Bitte achten Sie darauf, es vorsichtig zu befestigen,
Sie es gründlich trocknen, bevor Sie das Produkt
Produktes deutlich verkürzen kann.
Bei technischen Fragen zu diesem Produkt
contact@festive-lights.com (in englischer/deutscher
Werktagen (in englischer/deutscher Sprache). Alternativ
auch telefonisch unter +441257 792111 von 10:00 Uhr -18:00
(in englischer Sprache).
Made in China Fabriqué
festive-lights.com
to the way in which it is handled. Make sure it is
and storage. 2. Dry thorough y before storage,
please email Festive Lights Ltd on
within 2 working days. Alternative y, contact
between 9.00am - 5.00pm Monday
et vos produits dépend aussi de a faqon dont
pendant Ie montage et le démontage
avant rangement car l'humidité pourrait raccourcir
ce produit, veuillez contacter Festive Lights
sous un délai de 2 jours ouvrés. Vous
entre 9hOO et 17hOO du
ist abhängig von der Art der Behand
abzubauen und zu lagern. 2. Lassen
agern, da Nässe die Lebensdauer des
wenden Sie sich bitte an Festive Lights Ltd,
Sprache). Wir antworten innerhalb von 2
können Sie uns montags bis freitags
Uhr (deutsche Zeit) erreichen
111
en Chine Hergestellt in China
CONECTGO
In the interest of the safe and proper
carefully and retain
General
I. This product is only for use with
products in this range come with weatherproof,
seamlessly with all items
maximum LED quantity
maximum. 4. Products
indoor and seasonal
to
Before you start
1. If using the transformer
enclosure to ensure
accessories (e.g. metal
NOT BE MODIFIED;
different power source than
product unsafe. 4. The LED bulbs
ainsi
not attempt to repair or replace
Ltd
PRODUCT CODE PRODUCT
CC004 AA Battery
ccoos D Battery
Solar
CC006
Small Transformer,
CC052
CC008 Medium
Large
CG02SB
Note for CG025: only 1,000 LEDs/5 SETS can be run from a single port at any one time. So if
your display contains more than 1,000/5 SETS then simply use the other ports to continue
your display.
Fixing
I. Before fixing, it is recommended
secure. 2. Before connecting
water seals (rubber
regular 240V socket,
position cables to avoid a 'tripping'
UK importer: Festive Lights Ltd, Preston Road, Charnock
EU importer: Festive
use of this product, please read these instructions
them for future reference.
products in our Connect Co 31V connectable
2 pin connectors,
in the 31V system range. 3. Check your power
and power consumption of this product
in this 31V range are manufactured to IP44 standards
outdoor use.
power source, a ways connect indoor/ in a suitable weatherproof
a safe connection. 2. Avoid using sharp-edged
wires) to hang or fasten any part of your system.
if any modification is made i.e. cutting, extending
supplied, the warranty will be invalidated
used are designed for ong life and are non-replaceable.
them.
1. On the starting
connector (2 pin) into the female connection
your chosen power source (2hole) and screw
seal over the new
that the connection
polarity.
2. To connect
end cap from
the additonal
polarity), check
and seal the connection
provided. Once you connect
in the series, ensure
secure y fastened
NAME MAX. LED LOAD MAX
(string lights) (festoon
Box 200 LEDs 1 SET
Box 400 LEDs 2 SETS
Panel
200 LEDs 1 SET
BS Plug
600 LEDs 3 SETS
Transformer, BS Plug 1,600 LEDs 11 SETS
Transformer, BS Plug 20 SETS (5 sets from
4,000 LEDs
that you test al products and check
to an electricity supply, check that no wires are damaged
"o" rings) are in place. 3. Make sure you connect
but do not switch on until all connections
hazard and away from sources
Richard, Chorley, Lancashire,
Lights BV, Utrechtseweg 341, 3818 EL Amersfoort,
range. 2. All
which will connect
rating abel for
and do not exceed this
allowing for
tools or mounting
3. This product MUST
lead wires, or using a
and may render the
Do
set, connect the male
on
the
connection firmly. Ensure
is n-nade with the correct
additional products, remove the
the original set and connect on
product (ensuring correct
the rubble 'o'ring is secure
using the screw sea
the last product
that the end cap is
to finish the light chain.
NO. SET TIMER
Lights)
x
each port)
all connections are
and
the power supply to a
are complete. 4. Careful y
of direct heat.
PR7 SHH
Netherlands