VEVOR BB702A Bedienungsanleitung Seite 14

1. Clean the base bracket and seat frame with wet cloth and a mild detergent.
Dry thoroughly then. Please do not use corrosive cleaner.
2. Removable and washable fabric
3. Seat fabric: Clean it with wet cloth and a mild detergent, and dry it.
4. Canopy: Take it off and put a little cleaner, wash it gently by hands. Rinse it
with clean water, and then hang it to dry, avoiding exposure to the sun.
5. Pillow: Tear the Velcro off and take the pillow off. Put a little cleaner, wash it
gently by hands, and then rinse it with clean water. Hang it avoiding sun
exposure.
1. Please check this baby swing regularly. Make sure of each part is well
connected and well installed. Stop using for poor connection and
connect/install it again if necessary.
2. This product contains electronic components, which shall not be used in water
or in a humid environment, Please ensure the product is dry, and store it in a
cool and dry place, avoiding direct sunshine for a long time.
Fast self-inspection solution below
NO. Trouble
1 Not energized
The power
2
keeps flashing
3 Motion lock stuck
4 Overstring/Strike
Solution
1.Checkwhether the adapter and DC cable are
firmly connected. lf loose, connect them firmly.
2.DC cable maybe damaged, Please contact
customer service to replace DC cable.
lamp Use matchable adapter with an output voltage
of5V and 1A
Check the motion lock, Pull it up to unlock the seat
frame.
Power off and restart it again
- 13 -