Alpina RSM-1409 Bedienungsanleitung Seite 3

• Never clean the body with water as damage and/or injury may
occur.
• Never plug in or unplug the device with wet hands as damage
and/or electric shock may occur.
• Only use with the supplied power adapter
Charging
1. The applicable voltage is 100-240V~ 50/60Hz.
2. Insert the connector of the power cable into the shaver socket. Then insert
the charging plug into a wall power socket; the red indication light will come
on.
3. It takes about 8-12 hours to charge the shaver completely.
4. The shaver must be charged for 12-16 hours continuously before its first
use.
5. With normal use of around three minutes per day, one charging will last
seven days.
6. It is advisable to recharge only when the power has been completely used
up. This will help to extend the life of the battery.
Shaving
1. Slide the switch up to turn the shaver on. Stretch your skin with your other
hand and shave slowly against beard's direction of growth.
2. Put the protective cover on after shaving in order to prevent damage to the
foil.
3. Do not use the shaver if the foil is damaged, as it may hurt your skin.
4. If you want to cut hair on the temples or a long beard, slide the trimmer
switch up, touch the trimmer to your skin vertically and shave slowly.
Cleaning Method
1. Turn off using the switch. Pull the foil holder upwards and use the cleaning
brush to clean the blades and the foil's inside surface.
2. You are advised to clean the foil periodically to keep the shaver working
well.